TAMI - wiki - tamiwiki:projects

4roaches1spider

Anonymous (anonymous@undisclosed.example.com) — 2024-09-08T20:30:26+00:00

I want 4 roaches and 1 spider Project description Section 1 Section description

5g

Anonymous (anonymous@undisclosed.example.com) — 2024-02-16T12:06:17+00:00

5G until we get fiber.... 5G is our option. ADSL took us this far. @astra reports "I got just shy of a gigabit on a fold 4 at the entrance to Tami (inside, where the DSL modem is right now) and about 500mbits with an iPhone 15" so that's the benchmark.

ants

Anonymous (anonymous@undisclosed.example.com) — 2024-09-08T20:33:49+00:00

Growing ant colony Project description Section 1 Section description

attami

Anonymous (anonymous@undisclosed.example.com) — 2023-06-20T08:37:36+00:00

ATTAMI [2023] We are back! after loosing our old wiki to some digital storm git for pcb TODO * simple attachment to flipperZero (new board?) start talking about v2 of the 1$ ATtami devboard (ATtiny85 price has rocketed) a few interesting Canidates for a 1$/5₪ board.

audio

Anonymous (anonymous@undisclosed.example.com) — 2025-03-30T13:03:27+00:00

firefly for jack applications PIPEWIRE_LATENCY="128/48000" pw-jack jack_delay change defaults in cat pipewire.conf | grep 256 default.clock.quantum = 256

avb

Anonymous (anonymous@undisclosed.example.com) — 2024-04-06T09:25:15+00:00

AVB AVB (Audio Video Bridging) is a protocol that address the lack of a unified, open protocol for video and audio distribution over standard ethernet network. IEEE 802.1AS-2011 IEEE 802.1Qav-2009 IEEE 802.1Qat-2010 IEEE 802.1BA-2011 IEEE 1722-2011

bamba

Anonymous (anonymous@undisclosed.example.com) — 2025-08-14T13:53:59+00:00

how to make bamba original patent Ernest Scott, Weslaco, Tex. Application July 29, 1949, research * - ignore the GPT hallucination, there is no heater, the speed of the turn generates the heat * * * * * * * * * *

cantenna

Anonymous (anonymous@undisclosed.example.com) — 2023-08-17T17:37:40+00:00

Cantenna Extend Wi-Fi range with a Q&D/DIY antenna “dish” made out of used tin cans. Maybe provide/gain Internet access where/when service (ISP) isn't available/affordable? Plan? * Prior art: collect links, resources. * Research: does this really work? Countless prior art, YT videos, for years, but I've yet to find rigorous empirical evidence and explanations of why and how this should work, exactly.

dicom

Anonymous (anonymous@undisclosed.example.com) — 2023-06-27T12:12:59+00:00

See also brain we got a banana MRI from reddit (2014) but is it the fruit? the florescence flower? lets find out. 1. convert to png using ffmpeg ffmpeg -i banana.mp4 banana%05d.png but, we have a logo on the bottom, this will show artifact in the volumetric view. lets remove it while exporting.

drawbot

Anonymous (anonymous@undisclosed.example.com) — 2025-12-22T12:34:02+00:00

DRAWBOT there are three repos needed to get this going * GRBL git - the firmware running on the arduino+grbl shield * drawbot_LY git - the Inkscape extension that converts vector to gcode * Universal gcode sender- this java app loads the gcode above and sends the gcode commands one by one to the Arduino over serial.

egpu

Anonymous (anonymous@undisclosed.example.com) — 2023-11-04T09:07:58+00:00

EGPU we are using the TH3P4G3 eGPU external thunderbolt thing. Linux Kernal notes > realtechtalk guide, mirror ThunderBolt check and setup TLDR * upgrade kernel (??) * install gfx (nvidia|amd) drivers * plug card * reboot * trust thunderbolt The authorized attribute reads 0 which means no PCIe tunnels are created yet. The user can authorize the device by simply entering: # echo 1 > /sys/bus/thunderbolt/devices/0-1/autho…

funzine

Anonymous (anonymous@undisclosed.example.com) — 2023-08-11T09:56:36+00:00

tami various fanzines עט לעטלף TBD tami fazine #2 [printable pdf] [svg source]

ibm_x3556

Anonymous (anonymous@undisclosed.example.com) — 2024-05-08T19:45:08+00:00

IBM x3550 IBM System x3550 M3 Type 4254 and 7944 BIOS needs login/user at IBM bios update update uEFI BIOS via usb over - see IMM guide cooling normal server cooling is designed with space in mind we don't have that issue (as we are not normal) a retrofit is in order.

jumpers

Anonymous (anonymous@undisclosed.example.com) — 2024-07-18T16:01:02+00:00

tami everyone needs jumper cabelas. unfortunately 90% of the jumper wires sold in open markets are unreliable. anyone using them might lose hours by faulty cables. (dont get me started on store bought alligator connectors) Workshop more like a sweatshop,we will soon have a tami even where we will sit, chat, and incidentally make jumper cables.

kvm

Anonymous (anonymous@undisclosed.example.com) — 2024-09-08T12:44:33+00:00

> Customers that wish to sample or purchase the ADV7672 must be licensed HDMI 2.1 adopters listed at HDMI.org and licensed HDCP 2.x adopters listed at Digital-CP.com. KVM hi this is kvm all about kvm only kvm what im trying to get is seemless switching between sources. this calls for a unified EDID

lidar

Anonymous (anonymous@undisclosed.example.com) — 2023-10-13T19:17:21+00:00

LIDAR VLP-16 by velodyne PCAP capture for consumption by these transmits on port 2368 ip 192.168.1.201 stats on ATM on devdesk@telavivmakers.space software veloview - record/view VelodyneCapture - capture and recorded with velodyne veloparser - read pcap-files recorded with velodyne.

lightingtracker

Anonymous (anonymous@undisclosed.example.com) — 2025-09-23T08:00:41+00:00

below is an edited chat with Tõnu, who first draw my attention to blitzortung.org lighting tracker, the project uses GPS location and timing coupled with radio antennas to detect faint lighting signals from up to 5000Km and calculate the location by triangulation.

mynt-eye-s2110

Anonymous (anonymous@undisclosed.example.com) — 2026-01-26T17:32:09+00:00

Stereoscopic Camera (MYNT EYE S2110) Model S2110-95/ColorSize PCB dimension:17.74x100mm Total dimension:125x47x26.6mmFrame Rate 1280×400@10/20/30/60fps 2560×800@10/20/30fpsResolution 1280×400; 2560×800Depth Resolution Based on CPU/GPU Up to 1280*400@60FPS

p40

Anonymous (anonymous@undisclosed.example.com) — 2024-01-24T20:28:47+00:00

TAMI-P40 TAMI-P40 is our purposely built server geared for high video memory applications and development. it is built around a Tesla P40, a server orientated compute-only (aka no display output) GPU released ~2016. pros: * cheapest 24Gb VRAM card you can

piezo

Anonymous (anonymous@undisclosed.example.com) — 2023-11-26T06:21:50+00:00

had a nice page in oldwiki, here's a reboot. im placing it for now. a lot of the info starts from [collinshandmade_electronic_music.pdf], if there is a mention to chapter number below, it's from this ebook. Piezo see: how to make a contact mike: using piezo disks to pick up tiny sounds, chapters 7-8

pizza

Anonymous (anonymous@undisclosed.example.com) — 2024-04-15T18:46:34+00:00

Tami Monday Pizza Dough Recipe The actual recipe gets tweaked every time I make it The recipe is based on this If you also want to make pizza start there Ingredients * 400g AP flour * 280ml water * 2-4g instant yeast(FIXME explain further) *

projects

Anonymous (anonymous@undisclosed.example.com) — 2025-12-25T15:46:28+00:00

Projects Feel free to bring your own ideas and projects to our space. We would be very happy if you create a wiki page for your project and share its progress/results there (don't forget to put project link to the list below). List of projects

scanning-tami

Anonymous (anonymous@undisclosed.example.com) — 2025-04-04T15:18:20+00:00

Very WIP page(as of 3rd of April 2025), you can help by asking questions in the telegram group or in-person on Mondays subgraph sg1["Global Registration"] direction LR vf[(Video Frames)] --> undistort["Undistort Frames"] --> fd fd["Feature Detection"] --> fm subgraph fm["Feature Matching"] direction LR curframe@{ shape: circle, label: "Frame t" } lcpairs[("Loop Closure Groups")] mne["Match to all fra…

sniper

Anonymous (anonymous@undisclosed.example.com) — 2023-06-23T13:33:55+00:00

booting NVME on our gigabyte sniper Z97 motherboard, it was a amtter of updatding the bios to F8 version. installing the distro (fedora) onto an SSD target then dd if=/dev/sda of=/dev/nvme status=progress alas, the nvme seems to be trash. it is very slow and sometimes doesnt get recognized at all

sorting

Anonymous (anonymous@undisclosed.example.com) — 2024-09-08T20:35:50+00:00

Sorting hackerspace Project description Section 1 Section description

stm

Anonymous (anonymous@undisclosed.example.com) — 2023-11-05T17:02:30+00:00

" hosting a workshop themed around repurposing cheap ST-LINK clones (I got two for 14.39 ILS including shipping from Aliexp). The idea is to teach people how to turn them into FIDO2 (Webauthn) hardware tokens which can be used for 2FA on many popular websites (including Github, Google account, Facebook and many more, see

swir

Anonymous (anonymous@undisclosed.example.com) — 2024-06-27T15:33:20+00:00

SWIR videography farewell party to our g-033-tecless SWIR camera. raw data

thermalcam

Anonymous (anonymous@undisclosed.example.com) — 2024-02-19T21:07:32+00:00

Thermal Imaging Thermal camera transmits udp packets to a windows application. TODO * capture udp packets * analyze for handshake and frame * cross platform image stream decoding * find camera's conversion formula or lookup table OR calibrate * grab calibration data

thermatext

Anonymous (anonymous@undisclosed.example.com) — 2023-06-09T10:52:34+00:00

hi, this is the wiki page for

ultrasonic-cleaner

Anonymous (anonymous@undisclosed.example.com) — 2024-11-22T21:58:01+00:00

building an ultrasonic cleaner This kit is NOT shoot and forget. it's very sensitive (and dangerous), and DEPENDS on other parts, 1. get an ultrasonic kit, made of driver/controller, and funny bell shaped piezo things. They include weird little screws (

walker

Anonymous (anonymous@undisclosed.example.com) — 2026-03-01T06:27:20+00:00

obaka robots walker sim nice sellers * pololu - * - gears and pullies