CometMeWindLoggingProject/MR3020

From TAMI
Revision as of 17:26, 18 June 2015 by AlonLevy (talk | contribs) (→‎OpenWRT Installation)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

Install log for MR3020

Initial state

General

192.168.0.254, admin/admin, via ethernet cable, using poweradapter (no powered hub, see if it handles wifi + gsm)

Connection to 192.168.0.254 data

Time = 1970-01-01 2:38:43 9524s
H-Ver = MR3020 v1 00000000 : S-Ver = 3.17.2 Build 140610 Rel.65031n
L = 192.168.0.254 : M = 255.255.255.0
3G/4G : 3G/4G = 0.0.0.0 : M = 0.0.0.0 : G = 0.0.0.0

http://www.tp-link.com/en/download/TL-MR3020_V1.html

From firmware page:

Firmware Version: 	 3.17.2 Build 140610 Rel.65031n
Hardware Version: 	 MR3020 v1 00000000

OpenWRT Installation

Regurgitating http://wiki.openwrt.org/toh/tp-link/tl-mr3020

1. Download squashfs generic 14.07 (15.05-rc2 is broken, bad magic): http://downloads.openwrt.org/barrier_breaker/14.07/ar71xx/generic/openwrt-ar71xx-generic-tl-mr3020-v1-squashfs-factory.bin 2. Configure lan to DHCP local only (no dns & routing), or just use address in 192.168.1.[2-254] range. Connect to http://192.168.1.1/, set password.

Modem configuration (steps)

TODO

Wifi client configuration (steps)

TODO

Copy paste configuration

TODO