Difference between revisions of "Mini CNC"

From TAMI
Jump to navigationJump to search
Line 2: Line 2:
  
 
== MYDIYCNC ==
 
== MYDIYCNC ==
 
+
http://i.imgur.com/gDEV2NR.jpg
 
<strike>its wired, but not moving yet</strike><br>
 
<strike>its wired, but not moving yet</strike><br>
 
* suspect the supplied driver being  bad or wired wrong.
 
* suspect the supplied driver being  bad or wired wrong.
 +
http://i.imgur.com/qs1ZOES.jpg
 
* moving successfully all 3 axis using an [http://www.schmalzhaus.com/EasyDriver/Examples/EasyDriverExamples.html easy-driver] controller - a common stepper driver for <750mA steppers.
 
* moving successfully all 3 axis using an [http://www.schmalzhaus.com/EasyDriver/Examples/EasyDriverExamples.html easy-driver] controller - a common stepper driver for <750mA steppers.
 +
http://i.imgur.com/vzXyVdL.jpg
 
* i would like to try running the miniCNC using different controller, preferably a RAMPS board (elecfreaks.com)
 
* i would like to try running the miniCNC using different controller, preferably a RAMPS board (elecfreaks.com)
 
<br>
 
<br>

Revision as of 20:44, 20 December 2013


MYDIYCNC

gDEV2NR.jpg its wired, but not moving yet

  • suspect the supplied driver being bad or wired wrong.

qs1ZOES.jpg

  • moving successfully all 3 axis using an easy-driver controller - a common stepper driver for <750mA steppers.

vzXyVdL.jpg

  • i would like to try running the miniCNC using different controller, preferably a RAMPS board (elecfreaks.com)


for the other cnc's in the space see the Big_CNCs page

manual

ftp://mail/_incoming/MyDIYCNC%20router%20plans.pdf

wiring

following is the cable wiring with function/color/number we connected using diagram from manual (page 45)


spindle cw blk 1

xstep brwn 2

xdir red 3

x enabe orng 4

y step ylw 5

ydirdeep grn 6

yenabe deepBlu 7

zsteppurplr 8

zdir gry 9

wht 10

x limit switch pinkk 11

light green 12

grey blk 13

zenable brwn white 14

red white 15

orng white 16

deep green /whte 17

blu white 18

purpe white 19

red blk 20

orng blk 21

ylw bk 22

grn blk 23

gry blk 24

pnk blk 25


software

  1. KCAM 4 (demo version) -
 slightly configured (page 84)
  1. linuxCNC
  2. MACH3