Difference between revisions of "Mini CNC"

From TAMI
Jump to navigationJump to search
Line 83: Line 83:
  
 
= software =  
 
= software =  
# KCAM 4 (demo version) -  
+
*KCAM 4 (demo version) -  
  slightly configured (page 84)
+
slightly configured (page 84)
# linuxCNC  
+
*linuxCNC  
# MACH3
+
got a conf file from mydiycnc site (named MyDIYCNC.stepconf)<br>
 +
following the [http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Configuring_EMC2 linuxCNC configuration file]
 +
 
 +
*MACH3

Revision as of 18:05, 11 February 2014


MYDIYCNC

gDEV2NR.jpg
its wired, but not moving yet

  • suspect the supplied driver being bad or wired wrong.

qs1ZOES.jpg

  • moving successfully all 3 axis using an easy-driver controller - a common stepper driver for <750mA steppers.

vzXyVdL.jpg

  • i would like to try running the miniCNC using different controller, preferably a RAMPS board (elecfreaks.com)


for the other cnc's in the space see the Big_CNCs page

manual

ftp://mail/_incoming/MyDIYCNC%20router%20plans.pdf

links

  • milling fine PCB traces calls for leveling the bed-
    • PcbSubtraction

wiring

stepper wiring
A1 - black
A2 - green
B1 - red
B2 - blue


following is the cable wiring with function/color/number we connected using diagram from manual (page 45)


spindle cw blk 1

xstep brwn 2

xdir red 3

x enabe orng 4

y step ylw 5

ydirdeep grn 6

yenabe deepBlu 7

zsteppurplr 8

zdir gry 9

wht 10

x limit switch pinkk 11

light green 12

grey blk 13

zenable brwn white 14

red white 15

orng white 16

deep green /whte 17

blu white 18

purpe white 19

red blk 20

orng blk 21

ylw bk 22

grn blk 23

gry blk 24

pnk blk 25

software

  • KCAM 4 (demo version) -

slightly configured (page 84)

  • linuxCNC

got a conf file from mydiycnc site (named MyDIYCNC.stepconf)
following the linuxCNC configuration file

  • MACH3