Difference between revisions of "Mini CNC"

From TAMI
Jump to navigationJump to search
(todo)
Line 1: Line 1:
  
  
original body came from a MYDIYCNC that was left on a beach.
+
original body came from a MYDIYCNC that was left on a beach.<br>
ilan made the hardware work. now we try the software side.
+
now try the software side.
  
 
==TODO==
 
==TODO==
*z stepper motor is broken -  nema17 replacement need to install.
+
*<s>z stepper motor is broken -  nema17 replacement need to install.</s>
 +
* install limit switch
 +
* figure out z-probe
 +
 
 +
==software==
 +
===gcode===
 +
* inkscape- https://www.youtube.com/watch?v=QOEMFQPaNEY&list=UUze-aBdbS0B_oJMPvCs85dA&index=31
 +
* cambam
 +
*
 +
 
 
<br>
 
<br>
 
==firmware==
 
==firmware==
 
===repetier host===
 
===repetier host===
comes witha configure tool and support for ramps/ATMEGA2560<br>
+
comes with a configure tool and support for ramps/ATMEGA2560<br>
 
did a test with the jog and it works. <br>
 
did a test with the jog and it works. <br>
 
all data can be found on glassroom pc at d:/cnc<br>
 
all data can be found on glassroom pc at d:/cnc<br>
Line 15: Line 24:
  
 
===gbrl===
 
===gbrl===
 +
<b>on hold</b>
 
one of the popular firmware for controlling stepper drivers and parsing G-CODE
 
one of the popular firmware for controlling stepper drivers and parsing G-CODE
 
* compile and upload -https://github.com/grbl/grbl/wiki/Compiling-Grbl
 
* compile and upload -https://github.com/grbl/grbl/wiki/Compiling-Grbl
 
*connecting to an MCU - https://github.com/grbl/grbl/wiki/Connecting-Grbl
 
*connecting to an MCU - https://github.com/grbl/grbl/wiki/Connecting-Grbl
  
 +
==manual==
 
* machine manual, good mostly for historical, mechanical design<br>
 
* machine manual, good mostly for historical, mechanical design<br>
 
[https://wiki.hackmanhattan.com/images/4/42/MyDIYCNC_Comprehensive_Plans_and_Manual_eBook_1-4.pdf MyDIYCNC_Comprehensive_Plans_and_Manual_eBook_1-4.pdf]
 
[https://wiki.hackmanhattan.com/images/4/42/MyDIYCNC_Comprehensive_Plans_and_Manual_eBook_1-4.pdf MyDIYCNC_Comprehensive_Plans_and_Manual_eBook_1-4.pdf]
 
= wiring =
 
 
stepper wiring<br>
 
A1 - black <br>
 
A2 - green<br>
 
B1 - red<br>
 
B2 - blue<br>
 
<br><br>
 
  
  
* others on the web
+
==links==
 
http://reprap.org/wiki/PCB_Milling
 
http://reprap.org/wiki/PCB_Milling
 
https://github.com/pknoe3lh/cncgcodecontroller
 
https://github.com/pknoe3lh/cncgcodecontroller

Revision as of 14:07, 25 October 2014


original body came from a MYDIYCNC that was left on a beach.
now try the software side.

TODO

  • z stepper motor is broken - nema17 replacement need to install.
  • install limit switch
  • figure out z-probe

software

gcode


firmware

repetier host

comes with a configure tool and support for ramps/ATMEGA2560
did a test with the jog and it works.
all data can be found on glassroom pc at d:/cnc
including used firmware

gbrl

on hold one of the popular firmware for controlling stepper drivers and parsing G-CODE

manual

  • machine manual, good mostly for historical, mechanical design

MyDIYCNC_Comprehensive_Plans_and_Manual_eBook_1-4.pdf


links

http://reprap.org/wiki/PCB_Milling https://github.com/pknoe3lh/cncgcodecontroller