Difference between revisions of "Mini CNC"

From TAMI
Jump to navigationJump to search
 
(16 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 +
=its broke, needs a ramps+mega combo=
  
 +
 +
http://i.imgur.com/8EjnffL.jpg
  
 
original body came from a MYDIYCNC that was left on a beach.<br>
 
original body came from a MYDIYCNC that was left on a beach.<br>
Line 11: Line 14:
  
 
==software==
 
==software==
===gcode===
+
there are usually several programs in the process.
* inkscape- https://www.youtube.com/watch?v=QOEMFQPaNEY&list=UUze-aBdbS0B_oJMPvCs85dA&index=31
+
* create the artwork (inkscape for 2D, XXX for 3D)
* cambam
+
* generate the toolpath/gcode (pycam, ....)
*
+
* cnc controller, to send the gcode
 +
 
 +
 
 +
===cnc controller===
 +
 
 +
got it working with [http://zapmaker.org/projects/grbl-controller-3-0/ grbl controller] on windows
 +
====universal gcode sender====
 +
using the 1.0.8 release , its java based so works anywhere. tested on arch/linux
 +
 
 +
link https://github.com/winder/Universal-G-Code-Sender
 +
screenshot https://imgur.com/6BYzooS
 +
 
 +
LTDR
 +
  wget  https://github.com/winder/builds/blob/master/UniversalGCodeSender/UniversalGcodeSender-v1.0.8.zip
 +
  unzip UniversalGcodeSender-v1.0.8.zip
 +
  cat README.txt
 +
  java -jar -Xmx256m UniversalGcodeSender.jar
 +
 
 +
====command line ====
 +
https://github.com/grbl/grbl/wiki/Using-Grbl
 +
 
 +
 
 +
and a list of other grbl controllers - http://www.shapeoko.com/wiki/index.php/Communication_/_Control
  
<br>
 
 
==firmware==
 
==firmware==
 +
===gbrl===
 +
one of the popular firmware for controlling stepper drivers and parsing G-CODE
 +
 +
noam installed gbrl for ramps - http://sourceforge.net/projects/grblforramps14/
 +
 
===repetier host===
 
===repetier host===
 +
<b>on hold</b>
 
[http://www.repetier.com/ Repertier-Host] ([https://github.com/repetier/Repetier-Host git]) is used for firmware and optionally for controlling software. Version 0.9 (current on fedora [http://pkgs.fedoraproject.org/cgit/RepetierHost.git/ 21]) isn't good enough. But [pronsole (printrun) works fine, so does this python snippet: (using pyserial only, and very basic gcode gleened from pronsole source):
 
[http://www.repetier.com/ Repertier-Host] ([https://github.com/repetier/Repetier-Host git]) is used for firmware and optionally for controlling software. Version 0.9 (current on fedora [http://pkgs.fedoraproject.org/cgit/RepetierHost.git/ 21]) isn't good enough. But [pronsole (printrun) works fine, so does this python snippet: (using pyserial only, and very basic gcode gleened from pronsole source):
  
Line 44: Line 74:
 
<br><br>
 
<br><br>
  
===gbrl===
+
 
<b>on hold</b>
+
 
one of the popular firmware for controlling stepper drivers and parsing G-CODE
+
==hardware==
* compile and upload -https://github.com/grbl/grbl/wiki/Compiling-Grbl
+
* PSU pinout http://www.rom.by/files/DPS-800GB-A_0.png
*connecting to an MCU - https://github.com/grbl/grbl/wiki/Connecting-Grbl
 
  
 
==manual==
 
==manual==
Line 54: Line 83:
 
[https://wiki.hackmanhattan.com/images/4/42/MyDIYCNC_Comprehensive_Plans_and_Manual_eBook_1-4.pdf MyDIYCNC_Comprehensive_Plans_and_Manual_eBook_1-4.pdf]
 
[https://wiki.hackmanhattan.com/images/4/42/MyDIYCNC_Comprehensive_Plans_and_Manual_eBook_1-4.pdf MyDIYCNC_Comprehensive_Plans_and_Manual_eBook_1-4.pdf]
  
 +
==links==
  
==links==
+
===generating models and gcode===
http://reprap.org/wiki/PCB_Milling
+
{{#ev:youtube|107FGoYX1bg}}
https://github.com/pknoe3lh/cncgcodecontroller
+
* [https://inkscape.org/en/ inkscape]-> [http://www.makercam.com/ makercam] -> <s>GRBL</s> RepetierHost  -> arduino+RAMPS
 +
* nica [http://reprap.org/wiki/PCB_Milling
 +
https://github.com/pknoe3lh/cncgcodecontroller tutorial] for makercam

Latest revision as of 12:30, 27 November 2015

its broke, needs a ramps+mega combo

8EjnffL.jpg

original body came from a MYDIYCNC that was left on a beach.
now try the software side.

TODO

  • z stepper motor is broken - nema17 replacement need to install.
  • connect the dremel to the RAMPS board
  • limit switch
  • z-probe - repetier z-probing

software

there are usually several programs in the process.

  • create the artwork (inkscape for 2D, XXX for 3D)
  • generate the toolpath/gcode (pycam, ....)
  • cnc controller, to send the gcode


cnc controller

got it working with grbl controller on windows

universal gcode sender

using the 1.0.8 release , its java based so works anywhere. tested on arch/linux

link https://github.com/winder/Universal-G-Code-Sender screenshot https://imgur.com/6BYzooS

LTDR

 wget  https://github.com/winder/builds/blob/master/UniversalGCodeSender/UniversalGcodeSender-v1.0.8.zip
 unzip UniversalGcodeSender-v1.0.8.zip
 cat README.txt
 java -jar -Xmx256m UniversalGcodeSender.jar 

command line

https://github.com/grbl/grbl/wiki/Using-Grbl


and a list of other grbl controllers - http://www.shapeoko.com/wiki/index.php/Communication_/_Control

firmware

gbrl

one of the popular firmware for controlling stepper drivers and parsing G-CODE

noam installed gbrl for ramps - http://sourceforge.net/projects/grblforramps14/

repetier host

on hold Repertier-Host (git) is used for firmware and optionally for controlling software. Version 0.9 (current on fedora 21) isn't good enough. But [pronsole (printrun) works fine, so does this python snippet: (using pyserial only, and very basic gcode gleened from pronsole source):

import serial
s = serial.Serial('
$ cat rectral.py 
import serial

s = serial.Serial(port='/dev/ttyACM0', baudrate=250000)
d = [('X', 1), ('Y', 1), ('X', -1), ('Y', -1)]
l = [100, 200, 300, 400, 500, 600, 700, 800, 1000, 1100]

for le in l:
    for axis, direc in d:
        s.write('G%s%s F3000\n' % (axis, direc * le))


firmware "configuration.h" file pastebin as of 2014-10-25
enabled support for z-probing,the settings are at ball park esp.

// distance/difference between activated probe and nuzzle height
#define Z_PROBE_HEIGHT 40




hardware

  • PSU pinout DPS-800GB-A_0.png

manual

  • machine manual, good mostly for historical, mechanical design

MyDIYCNC_Comprehensive_Plans_and_Manual_eBook_1-4.pdf

links

generating models and gcode

https://github.com/pknoe3lh/cncgcodecontroller tutorial] for makercam