Difference between revisions of "Mini CNC"

From TAMI
Jump to navigationJump to search
Line 14: Line 14:
 
* inkscape- https://www.youtube.com/watch?v=QOEMFQPaNEY&list=UUze-aBdbS0B_oJMPvCs85dA&index=31
 
* inkscape- https://www.youtube.com/watch?v=QOEMFQPaNEY&list=UUze-aBdbS0B_oJMPvCs85dA&index=31
 
* cambam
 
* cambam
*
 
  
<br>
+
 
 +
Can use pronsole / direct g code to serial port (example in firmware, need to move here)
 +
 
 +
RepetierHost ([https://github.com/repetier/Repetier-Host git]) for Fedora - this is an aside, I'm working on fixing the situation for fedora with this software (supposed to be good since we are using it's firmware part)
 +
* OpenTK requires a newer release (see [https://bugzilla.redhat.com/show_bug.cgi?id=1157173 fedora bz 1157173] I opened, and [https://bugzilla.redhat.com/show_bug.cgi?id=1032883 1032883]) which requires packaging mono-cecil ([https://bugzilla.redhat.com/show_bug.cgi?id=1058765 1058765])
 +
* RepetierHost needs a newer version, 0.9 is packaged but that doesn't work with our firmware, we need the newer 1.0.6
  
 
==firmware==
 
==firmware==

Revision as of 11:19, 26 October 2014


original body came from a MYDIYCNC that was left on a beach.
now try the software side.

TODO

  • z stepper motor is broken - nema17 replacement need to install.
  • connect the dremel to the RAMPS board
  • limit switch
  • z-probe - repetier z-probing

software

generating models and gcode


Can use pronsole / direct g code to serial port (example in firmware, need to move here)

RepetierHost (git) for Fedora - this is an aside, I'm working on fixing the situation for fedora with this software (supposed to be good since we are using it's firmware part)

  • OpenTK requires a newer release (see fedora bz 1157173 I opened, and 1032883) which requires packaging mono-cecil (1058765)
  • RepetierHost needs a newer version, 0.9 is packaged but that doesn't work with our firmware, we need the newer 1.0.6

firmware

repetier host

Repertier-Host (git) is used for firmware and optionally for controlling software. Version 0.9 (current on fedora 21) isn't good enough. But [pronsole (printrun) works fine, so does this python snippet: (using pyserial only, and very basic gcode gleened from pronsole source):

import serial
s = serial.Serial('
$ cat rectral.py 
import serial

s = serial.Serial(port='/dev/ttyACM0', baudrate=250000)
d = [('X', 1), ('Y', 1), ('X', -1), ('Y', -1)]
l = [100, 200, 300, 400, 500, 600, 700, 800, 1000, 1100]

for le in l:
    for axis, direc in d:
        s.write('G%s%s F3000\n' % (axis, direc * le))


firmware "configuration.h" file pastebin as of 2014-10-25
enabled support for z-probing,the settings are at ball park esp.

// distance/difference between activated probe and nuzzle height
#define Z_PROBE_HEIGHT 40



gbrl

on hold one of the popular firmware for controlling stepper drivers and parsing G-CODE

manual

  • machine manual, good mostly for historical, mechanical design

MyDIYCNC_Comprehensive_Plans_and_Manual_eBook_1-4.pdf


links

http://reprap.org/wiki/PCB_Milling https://github.com/pknoe3lh/cncgcodecontroller