Mini CNC

From TAMI
Revision as of 10:48, 24 October 2014 by Yair (talk | contribs) (→‎MYDIYCNC)
Jump to navigationJump to search


original body came from a MYDIYCNC that was left on a beach. ilan made the hardware work. now we try the software side.

gbrl

the firmware of choice. compile+upload instructions https://github.com/grbl/grbl/wiki/Compiling-Grbl

manual

MyDIYCNC_Comprehensive_Plans_and_Manual_eBook_1-4.pdf

links

  • milling fine PCB traces calls for leveling the bed-
    • PcbSubtraction

wiring

stepper wiring
A1 - black
A2 - green
B1 - red
B2 - blue


following is the cable wiring with function/color/number we connected using diagram from manual (page 45)


spindle cw blk 1

xstep brwn 2

xdir red 3

x enabe orng 4

y step ylw 5

ydirdeep grn 6

yenabe deepBlu 7

zsteppurplr 8

zdir gry 9

wht 10

x limit switch pinkk 11

light green 12

grey blk 13

zenable brwn white 14

red white 15

orng white 16

deep green /whte 17

blu white 18

purpe white 19

red blk 20

orng blk 21

ylw bk 22

grn blk 23

gry blk 24

pnk blk 25

software

  • KCAM 4 (demo version) -

slightly configured (page 84)

  • linuxCNC

i mounted the live linuxCNC disk and installed ubuntu on the cnc machine PCs #74
got a conf file from mydiycnc site (named MyDIYCNC.stepconf)
conf files are used to setup the configuration of new machines.

following the linuxCNC configuration file

  • MACH3


  • others on the web

http://reprap.org/wiki/PCB_Milling https://github.com/pknoe3lh/cncgcodecontroller