Mini CNC

From TAMI
Revision as of 16:49, 25 October 2014 by Yair (talk | contribs)
Jump to navigationJump to search


original body came from a MYDIYCNC that was left on a beach.
now try the software side.

TODO

  • z stepper motor is broken - nema17 replacement need to install.
  • connect the dremel to the RAMPS board
  • install limit switch
  • install out z-probe

software

gcode


firmware

repetier host

comes with a configure tool and support for ramps/ATMEGA2560
did a test with the jog and it works.
all data can be found on glassroom pc at d:/cnc
including used firmware

gbrl

on hold one of the popular firmware for controlling stepper drivers and parsing G-CODE

manual

  • machine manual, good mostly for historical, mechanical design

MyDIYCNC_Comprehensive_Plans_and_Manual_eBook_1-4.pdf


links

http://reprap.org/wiki/PCB_Milling https://github.com/pknoe3lh/cncgcodecontroller