Difference between revisions of "RePhone"

From TAMI
Jump to navigationJump to search
Line 8: Line 8:
  
 
This is with the battery connected (hence 500mA ?)
 
This is with the battery connected (hence 500mA ?)
 +
 +
 +
* buy/reference a [http://www.seeedstudio.com/wiki/Xadow_Metal_Frame metal frame]
 +
* [http://www.seeedstudio.com/forum/viewtopic.php?f=71&t=6371&sid=1288dc16bd7101798d3cc0c37719cf81 forum]
 +
* on the [http://www.kosagi.com/forums/viewtopic.php?id=158 MT62xx/MT25x firmware]
 +
* [http://www.seeedstudio.com/wiki/Xadow_GSM%2BBLE#Operating_Mode Xadow GSM_BLE] wiki page at seeed
 +
* [https://github.com/WayenWeng/RePhone_Create_Kit_VXP/tree/master/RePhone%20Create%20Kit%20VXP/MRE vxp] (ELF) of RePhone create kit
 +
* [http://www.seeedstudio.com/wiki/Eclipse_IDE_for_RePhone_Kit Eclipse IDE for RePhone Kit] - windows only at this point (maybe wine friendly, did not check. also, flash might work via openocd?)
 +
* [https://github.com/WayenWeng Wayen Weng] github page

Revision as of 09:35, 11 March 2016

Using Linux (Fedora 24 pre release).

Upon connecting the phone (main board, MT2502A based Xadow GSM/BLE board):

  • First appears as:
3-1             0e8d:0003 02  1.10   12MBit/s 0mA 2IFs (MediaTek Inc. MT6227 phone)
  • After a second changes to:
3-1             0e8d:0002 00  2.00   12MBit/s 500mA 1IF  (MediaTek Inc Product 53190160000810f)

This is with the battery connected (hence 500mA ?)