Difference between revisions of "SpeakersInTheSpace"

From TAMI
Jump to navigationJump to search
m
Line 1: Line 1:
 
LG SH33SU-S
 
LG SH33SU-S
- part of a home entertainement system: HT303SU - http://cdn.cnetcontent.com/9f/a0/9fa03dc2-5a87-4046-8017-abc3ec0f3d34.pdf
+
* part of a home entertainement system: HT303SU - http://cdn.cnetcontent.com/9f/a0/9fa03dc2-5a87-4046-8017-abc3ec0f3d34.pdf
- the 4 high frequency speakers, 4 Ohm impedance.
+
* the 4 high frequency speakers, 4 Ohm impedance.
  
 
Jamo Studio 105
 
Jamo Studio 105
- One has lower resistance (1.2hm) and causes TEAC AG-550 to overheat.
+
* One has lower resistance (1.2hm) and causes TEAC AG-550 to overheat.
- Investigated: left it in a worse state, but irrelevant since it wasn't working anyway.
+
** Investigated: left it in a worse state, but irrelevant since it wasn't working anyway.
- Specifically: 3 elements. Both smaller diameter / higher frequency ones have similar (+-5%) resistance to the working speaker.
+
** Specifically:
- The third, large element (low frequency) has 1.1~ Ohm (from memory) instead of a ~8/9 Ohm resistance. I disconnected the element but saw no change to the resistance. Left it disconnected (by desoldering one of the wires from the element, connecting it with tape so it won't flap, and leaving everything else the same). [[User:AlonLevy|AlonLevy]] ([[User talk:AlonLevy|talk]]).
+
*** 3 elements. Both smaller diameter / higher frequency ones have similar (+-5%) resistance to the working speaker.
 +
*** The third, large element (low frequency) has 1.1~ Ohm (from memory) instead of a ~8/9 Ohm resistance. I disconnected the element but saw no change to the resistance. Left it disconnected (by desoldering one of the wires from the element, connecting it with tape so it won't flap, and leaving everything else the same). [[User:AlonLevy|AlonLevy]] ([[User talk:AlonLevy|talk]]).
  
 
ONKYO TA-W100
 
ONKYO TA-W100

Revision as of 23:10, 18 October 2017

LG SH33SU-S

Jamo Studio 105

  • One has lower resistance (1.2hm) and causes TEAC AG-550 to overheat.
    • Investigated: left it in a worse state, but irrelevant since it wasn't working anyway.
    • Specifically:
      • 3 elements. Both smaller diameter / higher frequency ones have similar (+-5%) resistance to the working speaker.
      • The third, large element (low frequency) has 1.1~ Ohm (from memory) instead of a ~8/9 Ohm resistance. I disconnected the element but saw no change to the resistance. Left it disconnected (by desoldering one of the wires from the element, connecting it with tape so it won't flap, and leaving everything else the same). AlonLevy (talk).

ONKYO TA-W100