Difference between revisions of "WearableUltrasound"

Jump to navigationJump to search
Line 6: Line 6:
== Transmitter ==
== Transmitter ==
* 6 MHz pulse, TI board bit banging is too slow, possible to use PWM.
* 6 MHz pulse, TI board bit banging is too slow, possible to use PWM.
** [https://gist.github.com/alon/9291986 Trying out] the gpio on the raspberry pi
* Amplifier
* Amplifier
== Receiver ==
== Receiver ==
* Amplifier. 40 DB, how?
* Amplifier. 40 DB, how?

Revision as of 16:09, 1 March 2014



  • 6 MHz pulse, TI board bit banging is too slow, possible to use PWM.
  • Amplifier


  • Amplifier. 40 DB, how?
  • One of
    • Mixer to remove central frequency (driving frequency) and reduce to pulse width frequency
    • Sampler per pulse width (2 us -> 500 KHz -> ~2 MSPS)
  • or
    • Sampler for full width, 6 MHz, ~20 MSPS. Better then 8 bits - the more the merrier.

Ultrasound sensor physics and construction


Complete probes

Average speed of sound in tissue: 1540 m/s . Source: http://www.ncbi.nlm.nih.gov/pmc/articles/PMC3760231/#!po=25.0000

Weekathon notes

Notes from the IATI MNC weekathon wearable bladder monitoring device weekathon

  • Project outline:
    • Ultrasound sensor
      • how to build?
      • where to buy a crystal? what size? how does it relate to the driving frequency? receive/
  • Use 6 MHz
  • Get raspberry pi working
  • Get gpio 6 MHz on the pi
  • Opamp @Tami to get to 5V at least from pi using a breadboard / weld stuff
    • 3M from Nachum.
    • TODO 5 V at entrance with op amp
    • TODO 6 MHz, not 3 MHz
  • TODO take with me from the hacker space per what Aba said:
    • soldering station (take mine)
    • make some easy hook wires
    • tomorrow: check that the p6d works
  • TODO can I make an ADC from one of the chips we have?
  • DONE can I make a pulse generator from the EK-TM4C123GXL? yes.
  • DONE can I use the oscilloscope of Guy to record the signal? no.
  • Getting ge p6d probe to work
  • ultrasound general electronics documentation:
  • DONE Meeting with Ronen's coworker at GE
    • Etgar 4 Tirat Hacarmel, 49/45/47; take train at 8:25 from

Prep day notes

  • Bladder monitor
    • sensors, can it work with 40Khz cheap distance sensor?
    • if not, how cheap can we find an imaging (X MHz ?) sensor? interfaces to RPi?
    • build a model, plastic bottles, for development and demo.
    • forced drinking for forced urination (> 300 ml / 15 minutes)
    • ordering of input/output of sensor
      • side by side (like regular distance sensors)
      • one on front, one on back